How to Update Motorola Defy Plus with Stable ICS v4.0.4 Firmware

Earlier, Motorola had announced, Motorola Defy Plus will stuck on Android Gingerbread v2.3. Since then many of the Motorola Defy Plus users are looking for third party developers to launch Latest Android ICS v4.0 for their smartphone. Now the wait seems to be over, Defy owners can now upgrade to Android ICS v4.0 with Stable ICS v4.0.4 Firmware. Because, it is not an official update launch by Motorola so, you have to root your device first which will void warranty of your device. But all the rooting access will be revoked after updating the device with any official update. Before proceeding to installation process, read all its features first and then follow the pre-requisites.

Features Included in Stable ICS v4.0.4

• Camera Panorama
• Chrome
• Face Detection
• Network Usage Stat

Pre-Requisites

• It is highly recommended to backup all your data in SD Card before applying changes. Because there are full chances of data damage and corrupt. Use Astro File Manager to back up.
• Disable all Firewall/Anti-virus apps installed on your device.
• Charge your device upto 60% to avoid from unexpected shutdown of the device during the installation process.
• Enable USB Debugging Mode on your device through SettingsàApplicationsàDevelopmentàUSB Debugging.

Disclaimer:-Neither we nor the developers are responsible for any mis-happen to your Android phone. Try it at your risk.

How to Update Motorola Defy Plus with Stable ICS v4.0.4 Firmware

• First of all, download Stable ICS v4.0.4 Package and GoogleApps in your computer.
• Now connect your device with computer and move both the downloaded zip files in the root folder of your device.
• After it, switch off your phone and enter in Recovery mode. To enter in Recovery Mode, Press and hold the Volume Down key and press Power button.
• Now once you are in Recovery Mode, select Install Zip from SD CardàChoose Zip from SD Card and then select downloaded ICS package. Press Power button to confirm it.
• Once device is updated successfully, now you have to select ++++Go Back++++ and then Reboot System Now. It will take longer time than the normal start up time to display home screen. If it doesn’t starts within 5 minutes then try it by re-inserting the battery.

Note:- If any problem occurs during the updating process then start the process by reinserting the battery in it.

That’s it! Now you have successfully updates your Motorola Defy Plus device with Stable ICS v4.0.4 Firmware. If you face any issues during the installation process then mention it in the comments section and also share your reviews about the article.

read more...

How to Update Motorola Razr with Eclipse Custom ROM Firmware

Earlier, I wrote an article to Update Motorola Cliq 2 with AndroidGingerbread, this time Motorola Droid Razr has got new Eclipse Custom ROM update which has tons of features. It is not an official launch from Motorola side. Eclipse Team has come up with this update for Motorola Razr smartphone. Eclipse Custom ROM comes with tons of new features with great UI and speed. Remember, you must have to root your Motorola device to install Eclipse ROM on it.

Key Features of Eclipse Custom ROM Firmware

• Gingerbread 2.3.6 Firmware
• Deodexed
• Zipaligned
• Bloat Removed
• A lot of blur has been removed
• AOSP/CM7 mms
• AOSP music
• AOSP gallery3D
• Eclipse Launcher2
• CM7 file manager
• AOSP/CM7 Email
• AOSP/CM7 alarm clock
• AOSP car/desk dock
• AOSP news & weather
• AOSP calendar
• AOSP Sound Recorder
• Custom Blur Camera
• DSP Manager
• Eclipse Parts
• Accurate Battery – 1%
• CRT Animation ON and OFF
• Misc prop edits
• Custom Host File
• GPS config changes
• App widget Picker – boombuler
• Download crutch to help with web downloads
• Busy Box
• init.d support
• Eclipse Wallpaper
• Custom blue theme throughout
• ICS clock widget
• ICS Inspired boot animation
• Inverted Contacts/Dialer
• Inverted Google Talk2
• All Settings menus are inverted
• 7 pull down toggles (wireless, blue tooth, gps, sound/vibrate, auto brightness, data, and rotation)
• Native Facebook for android contacts sync
• Wake on volume
• Extended power controls (reboot, recovery, screenshot)

Disclaimer:-Neither we nor the developers are responsible for any mis-happen to your Android phone. Try it at your risk.

Pre-Requisites

• Back up of all your data in SD Card using Astro File Manager because during the installing process you may lose your data.
• Disable all Firewall/Anti-virus apps installed on your device.
• Your device must be charge upto 60% to avoid from unexpected shutdown during the installation.
• Enable USB Debugging Mode, head to SettingsàApplicationsàDevelopmentàUSB Debugging.

How to Update Motorola Razr with Eclipse Custom ROM Firmware

• First of all, download Eclipse Custom ROM Firmware Package in your computer.
• Now connect your device with computer and move the downloaded package in the root folder of the SD Card and then switch off your Motorola device to get into Recovery Mode.
• To enter in Recovery Mode, press both the Volume Keys simultaneously and holding these button press Power button. Now in Boot Mode section, select Recovery option from it.
• Now if your device says Safe System is Disabled then Enable it by navigating Safe BootàToogle Sage System and then Yes. If it doesn’t show such message then skip it.
• Once you are in Recovery Mode, Go BackàWipe Data Factory ResetàWipe Cache PartitionàMounts and StorageàFormat/Systemà++++Go Back++++ to choose AdvancedàWipe Dalvik Cacheà++++Go Back++++.
• Once its done, select Install Zip from SD CardàChoose Zip from SD Card and then select moved Eclipse Package. Now it will take 5-10 minutes to complete the process.
• On the successful completion of update, you will be again in Recovery Mode. Select ++++Go Back++++ and then Reboot System Now.

Note:- If any problem occurs during the updating process then start the process by reinserting the battery in it.

That’s it! Now you have successfully updates your Motorola Razr device with Eclipse Custom ROM Firmware. If you face any issues during the installation process then mention it in the comments section and also share your reviews about the article.

read more...

How to Update Motorola Cliq 2 with Official Gingerbread 2.3 Firmware

Earlier, Motorola Cliq 2 was equipped with Android Froyo 2.2 OS. Now after one year it has blessed with new Gingerbread 2.3 update. But the Motorola Cliq 2 owners will not be able to update its OTA. Motorola has officially launched Gingerbread 2.3 for Motorola Cliq 2 which can be download via Motorola Software Update and once the device is upgraded to new OS, users won’t be allow to downgrade their device. Here is the detailed list of all pre-requisites and simple instructions to upgrade your Motorola Cliq 2 device.

Change Log for Android Gingerbread 2.3 for Motorola Cliq 2:

• Improved Cursor Control
• Improved Word Selection and Copy
• Number and Symbol Shortcuts
• Sleep Mode
• Dock Icon Functionality
• App Groups
• Rich Location App
• App and Power Management Details
• Download Manager App
• New User Interface Icons
• Tasks App Enhancements
• Browser Search Engine
• Emergent Groups and Smart Contacts
• Updated Calendar Options
• Device Control Capabilities Through 3LM
• UI performance Improvements
• Battery Fixes
• Wi-Fi Calling Implemented fixes to improve reliability.
• Wi-Fi Hotspot Signal Improved

Disclaimer: We are not responsible for any mis-happening to your phone during the up-gradation, try it on your own risk. This Update is strictly only for Galaxy Nexus i515 don’t try on other android devices.

Pre-Requisites

• Back Up of all your important data like contacts, messages, bookmarks, files etc because if something went wrong all your data will be safe. Recommended use Astro File Manager to back up your data.
• Charge your device upto 60% to avoid unexpected shut down during the installation.
• Disable all Firewall and Antivirus apps installed on your device.
• Enable USB Debugging Mode on your dvice from the path SettingsàApplicationsàDevelopmentàUSB Debugging.

How to Update Motorola Cliq 2 with Official Gingerbread 2.3 Firmware

• First of all, go to the MotorolaSoftware Update page and check mark on the Step 3 box I have read Step 3 to enable download button.
• Now download and install MSU on your computer system.
• Once its done, open the application and connect your Motorola device with your computer.
• In some seconds, the device will be installed on your computer along with all its drivers. Now follow the simple on screen instructions provided by the MSU tool.
• Once it updates your device’s Firmware, disconnect your phone and check its status from SettingsàAbout Phone. If you see the version 2.0.87, this means you have successfully updated your Molorola Cliq 2 device.

Note: If something goes wrong during the installation process, start the upgrading process from the start by re-inserting the battery in our phone.

That’s it! Enjoy Gingerbread 2.3 OS on your Motorola Cliq 2 smartphone. 

read more...